Features
- Only 37 Instructions to Learn
．All single-cycle instructions except branches - Operating Speed:
．DC – 20 MHz oscillator/clock input
．DC – 200 ns instruction cycle - Interrupt Capability
- 8-Level Deep Hardware Stack
- Direct, Indirect, and Relative Addressing modes
Special Microcontroller Features
- Internal and External Oscillator Options
．Precision Internal 4 MHz oscillator factory calibrated to ±1%
．External Oscillator support for crystals and resonators
．5 us wake-up from Sleep, 3.0V, typical - Power-Saving Sleep mode
- Wide Operating Voltage Range – 2.0V to 5.5V
- Industrial and Extended Temperature Range
- Low-Power Power-on Reset (POR)
- Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
- Brown-out Detect (BOD)
- Watchdog Timer (WDT) with Independent Oscillator for Reliable Operation
- Multiplexed MCLR/Input Pin
- Interrupt-on-Pin Change
- Individual Programmable Weak Pull-ups
- Programmable Code Protection
- High Endurance Flash/EEPROM Cell
．100,000 write Flash endurance
．1,000,000 write EEPROM endurance
．Flash/Data EEPROM Retention: > 40 years
Low-Power Features
- Standby Current: – 1 nA @ 2.0V, typical
- Operating Current:
．8.5 A @ 32 kHz, 2.0V, typical
．100 A @ 1 MHz, 2.0V, typical - Watchdog Timer Current
．300 nA @ 2.0V, typical - Timer1 Oscillator Current:
．4 uA @ 32 kHz, 2.0V, typical
Peripheral Features
- 6 I/O Pins with Individual Direction Control
- High Current Sink/Source for Direct LED Drive
- Analog Comparator module with: One analog comparator
．Programmable on-chip comparator voltage reference (CVREF) module
．Programmable input multiplexing from device inputs
．Comparator output is externally accessible
APPLICATION：
- 消費性電子產品
- 家電產品
- 3C 產品
